How to Replace a Saab 9-3 Key
The Saab 9-3 is an excellent car that offers a lot of driver appeal. It has a powerful engine and excellent visibility. It also has a great safety rating.
However, it's important to ensure that you have at least two keys that are working for your car. If you lose one key, it could be very costly to buy the new one.
How to replace the ignition Key on the Saab 9-3
You'll must replace the car key in case it isn't turning. This guide will show how to replace the ignition key on the Saab 9-3. You will have to replace the key, get an updated reprogrammable phone, and buy a brand new case for your key-fob.
Most modern Saab models utilize transponders instead of a key made of metal to unlock the car and start it. The problem with this is that the reprogrammable battery in the key-fob will eventually wear out and lose charge any longer. This is particularly relevant if you continue to use the same key in the same lock.
The good news is that the battery can be replaced fairly easily by a professional locksmith. If you have the right tools, and a little patience you can do it yourself. The first step involves separating the key-fob. Insert an open-ended head into the slot that is in the middle of your case. You will need to work slowly, since the plastic is extremely thin and can be damaged easily.
When the case is opened and you are able to prepare the new key by combining the lower part of the previous key with the transponder and banana on the new key. This will ensure that the new key is connected to the CIM correctly, which could make all the difference when replacing the only key for your Saab 9-3.
How do you replace the ignition Key on a Saab 900
If you don't have two keys, you will need to remove the dashboard and steering wheel in order to access the ignition. Start by disconnecting saab 93 key programming . After the battery has been removed, you can remove all trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, you can insert a screwdriver in the opening behind the ignition switch.
The ignition cylinder is equipped with a key lock, which can stop the vehicle from starting if it does not contain the key. If the ignition switch on your 900 isn't functioning properly, you should check whether the key is inside the lock or within the ignition barrel. It's also a good idea to rotate your keys often and keep them clean so that one doesn't get bent.
Saab cars differ from other cars because they don't have traditional metal keys. Instead, the car recognizes the key fob's electric signals by a specific chip inside it.
If you only lose one working key fob your dealer will charge the cost of replacing your computer module (also known as the CIM). We can reprogram the EEPROM on your computer to enable it to accept new keys, without having to replace it. This will save you over 50% of the cost the dealer charges! This is the SAAB KEY PROGRAM. Find out more here!
How do you replace the ignition Key in a Saab9-5
The metal component of classic Saab keys is simple to copy and doesn't pose a significant threat to vehicle theft. The electronic part of the key-fob has a chip that recognizes the car when the key is inserted in the ignition switch.
Saab has relied on the technology of this anti-theft device for more than 10 years. It's not as secure as an actual lock on the door, but it does make the theft of your car much harder. That's why every Saab owner should always have an extra key available.
Most new Saabs come with two keys at the factory, but you can upgrade them at an agent using a handheld computer known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which have newer, more modern features that require a different key-fob and work through a different process.
The dealer will replace the CIM or TWICE module in these cars if keys have been lost, and charge you a premium for doing it. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.
How do I replace the ignition Key in an XC90 Saab
If your SAAB 9-3 key fob is having problems turning the barrel of the lock It could be the time to replace it. The process is fairly simple and you don't need to visit a dealer. Instead, you can do it yourself at home by using only a few tools.
First, you'll need prepare the new key. Before you begin, disable the anti-theft system by placing blocks underneath your rear wheels and engaging your handbrake. Then, put the key in the ignition and turn it to the on position, which activates the accessories, but doesn't start the engine. Repeat this procedure 5 times, and then keep the key on the "on" position.
Then you'll need to buy a new case for your key fob. They can be found in most auto parts stores and are usually extremely affordable. You can buy them with or without electronics, depending on the model.
To open the case, gently push the flathead screwdriver into the slot in the middle. The case should split easily and, once you have it, you'll be able to gain access to the internal electronics. Use a flathead screwdriver to gently pull out the electronic components.